/************************************************************* Download latest Blynk library here: https://github.com/blynkkk/blynk-library/releases/latest Blynk is a platform with iOS and Android apps to control Arduino, Raspberry Pi and the likes over the Internet. You can easily build graphic interfaces for all your projects by simply dragging and dropping widgets. Downloads, docs, tutorials: http://www.blynk.cc Sketch generator: http://examples.blynk.cc Blynk community: http://community.blynk.cc Follow us: http://www.fb.com/blynkapp http://twitter.com/blynk_app Blynk library is licensed under MIT license This example code is in public domain. ************************************************************* This example shows how to use ESP8266 Shield (with AT commands) to connect your project to Blynk. WARNING! It's very tricky to get it working. Please read this article: http://help.blynk.cc/hardware-and-libraries/arduino/esp8266-with-at-firmware Change WiFi ssid, pass, and Blynk auth token to run :) Feel free to apply it to any other example. It's simple! *************************************************************/ /* Comment this out to disable prints and save space */ #define BLYNK_PRINT Serial #include #include // You should get Auth Token in the Blynk App. // Go to the Project Settings (nut icon). char auth[] = "yourAUTH"; // Your WiFi credentials. // Set password to "" for open networks. char ssid[] = "yourSSID"; char pass[] = "yourpassword"; // Hardware Serial on Mega, Leonardo, Micro... //#define EspSerial Serial1 // or Software Serial on Uno, Nano... //#include //SoftwareSerial EspSerial(2, 3); // RX, TX // Your ESP8266 baud rate: #define ESP8266_BAUD 115200 ESP8266 wifi(&Serial); void setup() { // Debug console Serial.begin(9600); delay(10); // Set ESP8266 baud rate Serial.begin(ESP8266_BAUD); delay(10); Blynk.begin(auth, wifi, ssid, pass); } void loop() { Blynk.run(); }