/* * EEPROM Clear * * Sets all of the bytes of the EEPROM to 0. * Please see eeprom_iteration for a more in depth * look at how to traverse the EEPROM. * * This example code is in the public domain. */ #include void setup() { // initialize the LED pin as an output. pinMode(13, OUTPUT); /*** Iterate through each byte of the EEPROM storage. Larger AVR processors have larger EEPROM sizes, E.g: - Arduno Duemilanove: 512b EEPROM storage. - Arduino Uno: 1kb EEPROM storage. - Arduino Mega: 4kb EEPROM storage. Rather than hard-coding the length, you should use the pre-provided length function. This will make your code portable to all AVR processors. ***/ for (int i = 0 ; i < EEPROM.length() ; i++) { EEPROM.write(i, 0); } // turn the LED on when we're done digitalWrite(13, HIGH); } void loop() { /** Empty loop. **/ }