Printed Parts list - Breadboard Kit V2 (rev D10) //////////////////////////////////////////////////////////// DSO Module Parts: ============================== LEFT Side: MBBKV2-D10-DSO-DOOR-LATCH-A.stl MBBKV2-D10-DSO-DOOR-LATCH-B.stl MBBKV2-D10-DSO-LEFT-BASE.stl MBBKV2-D10-DSO-LEFT-HANDLE.stl MBBKV2-D10-DSO-LEFT-TOP.stl MBBKV2-D10-button.stl (qty 2) RIGHT Side: MBBKV2-D10-DSO-DOOR-LATCH-A.stl MBBKV2-D10-DSO-DOOR-LATCH-B.stl MBBKV2-D10-DSO-RIGHT-BASE.stl MBBKV2-D10-DSO-RIGHT-HANDLE.stl MBBKV2-D10-DSO-RIGHT-TOP.stl MBBKV2-D10-button.stl (qty 2) //////////////////////////////////////////////////////////// Small Modules (4 modules per Breadboard are needed): ============================== 2 Momentary Switch Module: MBBKV2-D10-mod-2xmom-switch-BASE.stl MBBKV2-D10-mod-2xmom-switch-TOP.stl MBBKV2-D10-mod-dupont.stl (qty 4) ============================== 1 Momentary and 1 Toggle Switch Module: MBBKV2-D10-mod-mom-toggle-switch-BASE.stl MBBKV2-D10-mod-mom-toggle-switch-TOP.stl MBBKV2-D10-mod-dupont.stl (qty 4) ============================== 2x Large LCD Module: MBBKV2-D10-mod-LG-LCD-BASE.stl MBBKV2-D10-mod-LG-LCD-TOP.stl MBBKV2-D10-mod-dupont.stl (qty 4) ============================== 2x Small LCD Module: MBBKV2-D10-mod-SM-LCD-BASE.stl MBBKV2-D10-mod-SM-LCD-TOP.stl MBBKV2-D10-mod-dupont.stl (qty 4) ============================== 2x Potentiometer Module: MBBKV2-D10-mod-pot-BASE.stl MBBKV2-D10-mod-pot-TOP.stl //////////////////////////////////////////////////////////// End modules (only one per breadboard is needed): ============================== LEFT Side: MBBKV2-D10-end-mod-LEFT.stl Right Side: MBBKV2-D10-end-mod-RIGHT.stl //////////////////////////////////////////////////////////// Plain Base Parts (base without bumps on the bottom of the breadboard base): ============================== LEFT Side: MBBKV2-D10-base-plain-LEFT.stl RIGHT Side: MBBKV2-D10-base-plain-RIGHT.stl Optional Dots that can be glued or taped to the base or the large and small modules if using the Stanley Base: MBBKV2-D10-dots-half MBBKV2-D10-dots-full //////////////////////////////////////////////////////////// Stanley Case Base Parts (base with bumps on the bottom of the breadboard base): ============================== LEFT Side: MBBKV2-D10-base-Stanley-LEFT.stl RIGHT Side: MBBKV2-D10-base-Stanley-RIGHT.stl Optional "dots" that can be glued or taped to the base of the large and small modules if using the Stanley Case base: MBBKV2-D10-dots-full MBBKV2-D10-dots-half //////////////////////////////////////////////////////////// Wire Combs: ============================== Normal (prints as one part): MBBKV2-D10-comb.stl ============================== Split (for smaller printers): MBBKV2-D10-comb-A.stl MBBKV2-D10-comb-B.stl ////////////////////////////////////////////////////////////