<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.0.1">
<drawing>
<board>
<plain>
<wire x1="0" y1="0" x2="100" y2="0" width="0" layer="20"/>
<wire x1="100" y1="0" x2="100" y2="80" width="0" layer="20"/>
<wire x1="100" y1="80" x2="0" y2="80" width="0" layer="20"/>
<wire x1="0" y1="80" x2="0" y2="0" width="0" layer="20"/>
<hole x="19.05" y="58.42" drill="2"/>
<hole x="50.8" y="58.42" drill="2"/>
<hole x="50.8" y="10.16" drill="2"/>
<hole x="19.05" y="10.16" drill="2"/>
<text>manmobilemachine.com</text>
<wire x1="17.145" y1="59.944" x2="17.145" y2="8.128" width="0.2032" layer="20"/>
<wire x1="17.145" y1="8.128" x2="53.467" y2="8.128" width="0.2032" layer="20"/>
<wire x1="53.467" y1="8.128" x2="53.467" y2="59.944" width="0.2032" layer="20"/>
<wire x1="53.467" y1="59.944" x2="17.145" y2="59.944" width="0.2032" layer="20"/>
</plain>
<libraries>
<library name="SparkFun-Connectors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="1X01">
</package>
</packages>
</library>
<library name="SparkFun-Capacitors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="CAP-PTH-5MM">
</package>
</packages>
</library>
<library name="diy-modules">
<description>&lt;b&gt;DIY Modules for Arduino, Raspberry Pi, CubieBoard etc.&lt;/b&gt;
&lt;br&gt;&lt;br&gt;
The library contains a list of symbols and footprints for popular, cheap and easy-to-use electronic modules.&lt;br&gt;
The modules are intend to work with microprocessor-based platforms such as &lt;a href="http://arduino.cc"&gt;Arduino&lt;/a&gt;, &lt;a href="http://raspberrypi.org/"&gt;Raspberry Pi&lt;/a&gt;, &lt;a href="http://cubieboard.org/"&gt;CubieBoard&lt;/a&gt;, &lt;a href="http://beagleboard.org/"&gt;BeagleBone&lt;/a&gt; and many others. There are many manufacturers of the modules in the world. Almost all of them can be bought on &lt;a href="ebay.com"&gt;ebay.com&lt;/a&gt;.&lt;br&gt;
&lt;br&gt;
By using this library, you can design a PCB for devices created with usage of modules. Even if you do not need to create PCB design, you can also use the library to quickly document your work by drawing schematics of devices built by you.&lt;br&gt;
&lt;br&gt;
The latest version, examples, photos and much more can be found at: &lt;b&gt;&lt;a href="http://diymodules.org/eagle"&gt;diymodules.org/eagle&lt;/a&gt;&lt;/b&gt;&lt;br&gt;&lt;br&gt;
Comments, suggestions and bug reports please send to: &lt;b&gt;&lt;a href="mailto:eagle@diymodules.org"&gt;eagle@diymodules.org&lt;/b&gt;&lt;/a&gt;&lt;br&gt;&lt;br&gt;
&lt;i&gt;Version: 1.8.0 (2017-Jul-02)&lt;/i&gt;&lt;br&gt;
&lt;i&gt;Created by: Miroslaw Brudnowski&lt;/i&gt;&lt;br&gt;&lt;br&gt;
&lt;i&gt;Released under the Creative Commons Attribution 4.0 International License: &lt;a href="http://creativecommons.org/licenses/by/4.0"&gt;http://creativecommons.org/licenses/by/4.0&lt;/a&gt;&lt;/i&gt;
&lt;br&gt;&lt;br&gt;
&lt;center&gt;
&lt;a href="http://diymodules.org/eagle"&gt;&lt;img src="http://www.diymodules.org/img/diymodules-lbr-image.php?v=1.8.0" alt="DIYmodules.org"&gt;&lt;/a&gt;
&lt;/center&gt;</description>
<packages>
<package name="TEMP-HUM-SENSOR-DHT11">
<description>&lt;b&gt;DHT11 - digital humidity &amp; temperature sensor&lt;/b&gt;</description>
</package>
<package name="WIRELESS-LORA-RFM95W#SMD">
<description>&lt;b&gt;868/915 MHz LoRa Radio Transceiver Module&lt;/b&gt;&lt;br /&gt;
Footprint for SMD assembly.</description>
</package>
</packages>
</library>
<library name="SparkFun-Resistors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="AXIAL-0.4">
<description>1/4W Resistor, 0.4" wide&lt;p&gt;

Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
</package>
</packages>
</library>
<library name="SparkFun-Boards">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find boards and modules: Arduino footprints, breadboards, non-RF modules, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="ARDUINO_PRO_MINI">
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="TX" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="ANT" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C5" library="SparkFun-Capacitors" package="CAP-PTH-5MM" value="104"/>
<element name="IC2" library="diy-modules" package="TEMP-HUM-SENSOR-DHT11" value="DHT"/>
<element name="R1" library="SparkFun-Resistors" package="AXIAL-0.4" value="1M">
<attribute name="VALUE"/>
</element>
<element name="R2" library="SparkFun-Resistors" package="AXIAL-0.4" value="10K">
<attribute name="VALUE"/>
</element>
<element name="R3" library="SparkFun-Resistors" package="AXIAL-0.4" value="470K">
<attribute name="VALUE"/>
</element>
<element name="U$1" library="SparkFun-Boards" package="ARDUINO_PRO_MINI" value="ARDUINO_PRO_MINI"/>
<element name="RX" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="RST" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="D7" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="D8" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="A4" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="A5" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="GND" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="RAW" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="RST1" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="A3" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="A2" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="A1" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="D10" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="A6" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="A7" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="DHT4" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="VALUE"/>
</element>
<element name="DHT1" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="VALUE"/>
</element>
<element name="DHT2" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="VALUE"/>
</element>
<element name="NEG" library="SparkFun-Connectors" package="1X01" value="NEG">
<attribute name="VALUE"/>
</element>
<element name="POS" library="SparkFun-Connectors" package="1X01" value="POS">
<attribute name="NAME"/>
</element>
<element name="DHT3" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="VALUE"/>
</element>
<element name="IC" library="diy-modules" package="WIRELESS-LORA-RFM95W#SMD" value="RFM95"/>
<element name="BAT-" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="BAT+" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="D2" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="DIO0-R" library="SparkFun-Connectors" package="1X01" value="DIO0">
<attribute name="VALUE"/>
</element>
<element name="DIO1-R" library="SparkFun-Connectors" package="1X01" value="DIO1">
<attribute name="VALUE"/>
</element>
<element name="D3" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
</elements>
<signals>
<signal name="3.3V">
<contactref element="R2" pad="P$2"/>
<contactref element="IC2" pad="1"/>
<contactref element="DHT1" pad="1"/>
<contactref element="R1" pad="P$1"/>
<contactref element="POS" pad="1"/>
<contactref element="IC" pad="B4"/>
<contactref element="U$1" pad="21"/>
<contactref element="BAT+" pad="1"/>
</signal>
<signal name="GND">
<contactref element="R3" pad="P$2"/>
<contactref element="C5" pad="2"/>
<contactref element="IC2" pad="4"/>
<contactref element="DHT4" pad="1"/>
<contactref element="NEG" pad="1"/>
<contactref element="IC" pad="A1"/>
<contactref element="IC" pad="A8"/>
<contactref element="IC" pad="B7"/>
<contactref element="BAT-" pad="1"/>
<contactref element="U$1" pad="4"/>
</signal>
<signal name="N$23">
<contactref element="R1" pad="P$2"/>
<contactref element="R3" pad="P$1"/>
<contactref element="U$1" pad="17"/>
<contactref element="C5" pad="1"/>
</signal>
<signal name="N$3">
<contactref element="U$1" pad="7"/>
<contactref element="IC" pad="B1"/>
</signal>
<signal name="N$1">
<contactref element="ANT" pad="1"/>
<contactref element="IC" pad="B8"/>
</signal>
<signal name="N$5">
<contactref element="IC" pad="B3"/>
<contactref element="DIO0-R" pad="1"/>
</signal>
<signal name="N$6">
<contactref element="U$1" pad="8"/>
<contactref element="IC" pad="A6"/>
</signal>
<signal name="N$7">
<contactref element="U$1" pad="9"/>
<contactref element="IC" pad="A5"/>
</signal>
<signal name="N$8">
<contactref element="U$1" pad="16"/>
<contactref element="IC" pad="A4"/>
</signal>
<signal name="N$9">
<contactref element="U$1" pad="14"/>
<contactref element="IC" pad="A3"/>
</signal>
<signal name="N$4">
<contactref element="U$1" pad="15"/>
<contactref element="IC" pad="A2"/>
</signal>
<signal name="N$10">
<contactref element="IC2" pad="2"/>
<contactref element="R2" pad="P$1"/>
<contactref element="U$1" pad="12"/>
<contactref element="DHT2" pad="1"/>
</signal>
<signal name="N$15">
<contactref element="U$1" pad="10"/>
<contactref element="D7" pad="1"/>
</signal>
<signal name="N$16">
<contactref element="U$1" pad="11"/>
<contactref element="D8" pad="1"/>
</signal>
<signal name="N$17">
<contactref element="U$1" pad="A4"/>
<contactref element="A4" pad="1"/>
</signal>
<signal name="N$18">
<contactref element="U$1" pad="A5"/>
<contactref element="A5" pad="1"/>
</signal>
<signal name="N$19">
<contactref element="U$1" pad="24"/>
<contactref element="RAW" pad="1"/>
</signal>
<signal name="N$20">
<contactref element="U$1" pad="23"/>
<contactref element="GND" pad="1"/>
</signal>
<signal name="N$21">
<contactref element="U$1" pad="20"/>
<contactref element="A3" pad="1"/>
</signal>
<signal name="N$22">
<contactref element="U$1" pad="22"/>
<contactref element="RST1" pad="1"/>
</signal>
<signal name="N$24">
<contactref element="U$1" pad="19"/>
<contactref element="A2" pad="1"/>
</signal>
<signal name="N$25">
<contactref element="U$1" pad="18"/>
<contactref element="A1" pad="1"/>
</signal>
<signal name="N$26">
<contactref element="U$1" pad="13"/>
<contactref element="D10" pad="1"/>
</signal>
<signal name="N$27">
<contactref element="U$1" pad="A7"/>
<contactref element="A7" pad="1"/>
</signal>
<signal name="N$28">
<contactref element="U$1" pad="A6"/>
<contactref element="A6" pad="1"/>
</signal>
<signal name="N$29">
<contactref element="IC2" pad="3"/>
<contactref element="DHT3" pad="1"/>
</signal>
<signal name="N$12">
<contactref element="D2" pad="1"/>
<contactref element="U$1" pad="5"/>
</signal>
<signal name="N$13">
<contactref element="RST" pad="1"/>
<contactref element="U$1" pad="3"/>
</signal>
<signal name="N$14">
<contactref element="U$1" pad="2"/>
<contactref element="RX" pad="1"/>
</signal>
<signal name="N$30">
<contactref element="TX" pad="1"/>
<contactref element="U$1" pad="1"/>
</signal>
<signal name="N$11">
<contactref element="D3" pad="1"/>
<contactref element="U$1" pad="6"/>
</signal>
<signal name="N$2">
<contactref element="DIO1-R" pad="1"/>
<contactref element="IC" pad="B2"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
