*
*
>Value
>Name
*
*
>Value
>Name
<b>CAPACITOR</b><p>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
>Value
>Name
>NAME
>VALUE
2-Pin JST PH Series Right-Angle Connector (+/- for batteries)
>Name
>Value
<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650
>NAME
>VALUE
>NAME
>VALUE
A
C
>NAME
>VALUE
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<h3>QFN-16 0.5mm Pitch</h3>
3 x 3mm Outline<br>
16-pin<br>
Used on the MMA8452Q accelerometer<br>
<br>
<b>Unproven</b><br>
<br>
Layout in accordance with App note AN4077<br>
http://cache.freescale.com/files/sensors/doc/app_note/AN4077.pdf
>NAME
>VALUE
X
Y
Z
>NAME
>VALUE
>Value
>Name
CAPACITOR
RESISTOR
2-Pin JST PH Series Right-Angle Connector (+/- for batteries)
Ceramic Chip Capacitor KEMET 2220 reflow solderMetric Code Size 5650
CAPACITOR
<h3>QFN-16 0.5mm Pitch</h3>
3 x 3mm Outline<br>
16-pin<br>
Used on the MMA8452Q accelerometer<br>
<br>
<b>Unproven</b><br>
<br>
Layout in accordance with App note AN4077<br>
http://cache.freescale.com/files/sensors/doc/app_note/AN4077.pdf
<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
>NAME
>VALUE
<h3>SparkFun Electronics' preferred foot prints</h3>
We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
>NAME
>VALUE
<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2>
<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p>
<h3>Obligatory Warning</h3>
<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p>
<h3>License</h3>
<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p>
<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
</p>
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
A
C
>NAME
>VALUE
>NAME
>VALUE
PCB EDGE
>NAME
>VALUE
<b>SOD-123</b>
<p>Source: http://www.diodes.com/datasheets/ds30139.pdf</p>
>NAME
>VALUE
<b>SOT23</b> - Reflow soldering
>NAME
>VALUE
>NAME
>VALUE
<h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
<h3>Plated Through Hole - 3 Pin</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>JST-Right Angle Male Header SMT</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
<li>JST_2MM_MALE</li>
</ul></p>
>NAME
>VALUE
<b>Jumpers</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>Solder jumper</b>
>NAME
>VALUE
Solder jumper
<b>EAGLE Design Rules</b>
<p>
Die Standard-Design-Rules sind so gewählt, dass sie für
die meisten Anwendungen passen. Sollte ihre Platine
besondere Anforderungen haben, treffen Sie die erforderlichen
Einstellungen hier und speichern die Design Rules unter
einem neuen Namen ab.
<b>EAGLE Design Rules</b>
<p>
The default Design Rules have been set to cover
a wide range of applications. Your particular design
may have different requirements, so please make the
necessary adjustments and save your customized
design rules under a new name.
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports Fusion synchronisation.
This feature will not be available in this version and saving
the document will break the link to the Fusion PCB feature.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.