/****************************************************************************** * * Copyright (C) 2009 - 2017 Xilinx, Inc. All rights reserved. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * Use of the Software is limited solely to applications: * (a) running on a Xilinx device, or * (b) that interact with a Xilinx device through a bus or interconnect. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * * Except as contained in this notice, the name of the Xilinx shall not be used * in advertising or otherwise to promote the sale, use or other dealings in * this Software without prior written authorization from Xilinx. * ******************************************************************************/ #include #include "network_init.h" #include "xparameters.h" #include "netif/xadapter.h" #include "eth_platform.h" #include "eth_platform_config.h" #if defined (__arm__) || defined(__aarch64__) #include "xil_printf.h" #endif #include "lwip/tcp.h" #include "xil_cache.h" #if LWIP_IPV6==1 #include "lwip/ip.h" #else #if LWIP_DHCP==1 #include "lwip/dhcp.h" #endif #endif /* defined by each RAW mode application */ void print_app_header(); int trans_start_application(); int recv_start_application(); int transfer_data(); void tcp_fasttmr(void); void tcp_slowtmr(void); /* missing declaration in lwIP */ void lwip_init(); #if LWIP_IPV6==0 #if LWIP_DHCP==1 extern volatile int dhcp_timoutcntr; err_t dhcp_start(struct netif *netif); #endif #endif extern volatile int TcpFastTmrFlag; extern volatile int TcpSlowTmrFlag; static struct netif server_netif; struct netif *echo_netif; #if LWIP_IPV6==1 void print_ip6(char *msg, ip_addr_t *ip) { print(msg); xil_printf(" %x:%x:%x:%x:%x:%x:%x:%x\n\r", IP6_ADDR_BLOCK1(&ip->u_addr.ip6), IP6_ADDR_BLOCK2(&ip->u_addr.ip6), IP6_ADDR_BLOCK3(&ip->u_addr.ip6), IP6_ADDR_BLOCK4(&ip->u_addr.ip6), IP6_ADDR_BLOCK5(&ip->u_addr.ip6), IP6_ADDR_BLOCK6(&ip->u_addr.ip6), IP6_ADDR_BLOCK7(&ip->u_addr.ip6), IP6_ADDR_BLOCK8(&ip->u_addr.ip6)); } #else void print_ip(char *msg, ip_addr_t *ip) { print(msg); xil_printf("%d.%d.%d.%d\n\r", ip4_addr1(ip), ip4_addr2(ip), ip4_addr3(ip), ip4_addr4(ip)); } void print_ip_settings(ip_addr_t *ip, ip_addr_t *mask, ip_addr_t *gw) { print_ip("Board IP: ", ip); print_ip("Netmask : ", mask); print_ip("Gateway : ", gw); } #endif #if defined (__arm__) && !defined (ARMR5) #if XPAR_GIGE_PCS_PMA_SGMII_CORE_PRESENT == 1 || XPAR_GIGE_PCS_PMA_1000BASEX_CORE_PRESENT == 1 int ProgramSi5324(void); int ProgramSfpPhy(void); #endif #endif #ifdef XPS_BOARD_ZCU102 #ifdef XPAR_XIICPS_0_DEVICE_ID int IicPhyReset(void); #endif #endif #if LWIP_IPV6==0 ip_addr_t ipaddr_tx, ipaddr_rx, ipaddr_ap, netmask, gw; #endif void init_ip(){ #if LWIP_IPV6==0 #if LWIP_DHCP==1 ipaddr_tx.addr = 0; ipaddr_rx.addr = 0; gw.addr = 0; netmask.addr = 0; #else /* initliaze IP addresses to be used */ IP4_ADDR(&ipaddr_tx, 192, 168, 0, 10); IP4_ADDR(&ipaddr_rx, 192, 168, 0, 9); IP4_ADDR(&ipaddr_ap, 192, 168, 0, 1); IP4_ADDR(&netmask, 255, 255, 255, 0); IP4_ADDR(&gw, 192, 168, 0, 1); #endif #endif } int ntwk_init_tx() { /* the mac address of the board. this should be unique per board */ unsigned char mac_ethernet_address[] = { 0x00, 0x0a, 0x35, 0x00, 0x01, 0x02 }; echo_netif = &server_netif; #if defined (__arm__) && !defined (ARMR5) #if XPAR_GIGE_PCS_PMA_SGMII_CORE_PRESENT == 1 || XPAR_GIGE_PCS_PMA_1000BASEX_CORE_PRESENT == 1 ProgramSi5324(); ProgramSfpPhy(); #endif #endif /* Define this board specific macro in order perform PHY reset on ZCU102 */ #ifdef XPS_BOARD_ZCU102 IicPhyReset(); #endif init_platform(); /* initliaze IP addresses to be used */ init_ip(); print_app_header(); lwip_init(); #if (LWIP_IPV6 == 0) /* Add network interface to the netif_list, and set it as default */ if (!xemac_add(echo_netif, &ipaddr_tx, &netmask, &gw, mac_ethernet_address, PLATFORM_EMAC_BASEADDR)) { xil_printf("Error adding N/W interface\n\r"); return -1; } #else /* Add network interface to the netif_list, and set it as default */ if (!xemac_add(echo_netif, NULL, NULL, NULL, mac_ethernet_address, PLATFORM_EMAC_BASEADDR)) { xil_printf("Error adding N/W interface\n\r"); return -1; } echo_netif->ip6_autoconfig_enabled = 1; netif_create_ip6_linklocal_address(echo_netif, 1); netif_ip6_addr_set_state(echo_netif, 0, IP6_ADDR_VALID); print_ip6("\n\rBoard IPv6 address ", &echo_netif->ip6_addr[0].u_addr.ip6); #endif netif_set_default(echo_netif); /* now enable interrupts */ platform_enable_interrupts(); /* specify that the network if is up */ netif_set_up(echo_netif); #if (LWIP_IPV6 == 0) #if (LWIP_DHCP==1) /* Create a new DHCP client for this interface. * Note: you must call dhcp_fine_tmr() and dhcp_coarse_tmr() at * the predefined regular intervals after starting the client. */ dhcp_start(echo_netif); dhcp_timoutcntr = 24; while(((echo_netif->ip_addr.addr) == 0) && (dhcp_timoutcntr > 0)) xemacif_input(echo_netif); if (dhcp_timoutcntr <= 0) { if ((echo_netif->ip_addr.addr) == 0) { xil_printf("DHCP Timeout\r\n"); xil_printf("Configuring default IP of 192.168.1.10\r\n"); IP4_ADDR(&(echo_netif->ip_addr), 192, 168, 1, 10); IP4_ADDR(&(echo_netif->netmask), 255, 255, 255, 0); IP4_ADDR(&(echo_netif->gw), 192, 168, 0, 1); } } ipaddr_tx.addr = echo_netif->ip_addr.addr; gw.addr = echo_netif->gw.addr; netmask.addr = echo_netif->netmask.addr; #endif print_ip_settings(&ipaddr_tx, &netmask, &gw); #endif /* start the application (web server, rxtest, txtest, etc..) */ trans_start_application(&ipaddr_rx, &ipaddr_ap); /* receive and process packets */ while (1) { if (TcpFastTmrFlag) { tcp_fasttmr(); TcpFastTmrFlag = 0; } if (TcpSlowTmrFlag) { tcp_slowtmr(); TcpSlowTmrFlag = 0; } xemacif_input(echo_netif); transfer_data(); } /* never reached */ cleanup_platform(); return 0; }