esphome:
  name: sonofplug01
  platform: ESP8266
  board: esp01_1m
  board_flash_mode: dout

wifi:
  ssid: !secret wifi1SSID
  password: !secret wifi1pass
  
  manual_ip:
    static_ip: !secret sonofplug01_ip
    gateway: !secret localgateway
    subnet: !secret localsubnet
    dns1: !secret localdns1
    dns2: !secret localdns2

status_led:
  pin:
    number: GPIO13
    inverted: false

captive_portal:

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:

globals:
   - id: trackingon
     type: bool
     restore_value: no

   - id: trackingoff
     type: bool
     restore_value: no
     
   - id: gl_ft_start_hr
     type: int
     restore_value: yes
   - id: gl_ft_start_mn
     type: int
     restore_value: yes  
   - id: gl_ft_start_ss
     type: int
     restore_value: yes  
   - id: gl_ft_stop_hr
     type: int
     restore_value: yes
   - id: gl_ft_stop_mn
     type: int
     restore_value: yes  
   - id: gl_ft_stop_ss
     type: int
     restore_value: yes   
     
sensor:
  - platform: wifi_signal
    name: "Sonoff Plug 01 Signal"
    update_interval: 60s
    
  - platform: homeassistant
    entity_id: sensor.ft_start_hr
    id: id_ft_start_hr
    
  - platform: homeassistant
    entity_id: sensor.ft_start_mn
    id: id_ft_start_mn
    
  - platform: homeassistant
    entity_id: sensor.ft_start_ss
    id: id_ft_start_ss
    
  - platform: homeassistant
    entity_id: sensor.ft_stop_hr
    id: id_ft_stop_hr
    
  - platform: homeassistant
    entity_id: sensor.ft_stop_mn
    id: id_ft_stop_mn
    
  - platform: homeassistant
    entity_id: sensor.ft_stop_ss
    id: id_ft_stop_ss     

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO0
      mode: INPUT_PULLUP
      inverted: True
    id: push_button
    on_press:
      then:
       - if:
          condition:
            - switch.is_off: relay
          then:
            - script.stop: relayison
            - script.execute: relayisoff
          else:
            - script.stop: relayisoff
            - script.execute: relayison
  
  - platform: status
    name: "Sonoff Plug 01 Status"
    
  - platform: template
    name: "Start Time Valid"
    id: start_time_valid
    lambda: |-
      if (id(homeassistant_time).now().second >= id(gl_ft_start_ss)) {
        if (id(homeassistant_time).now().minute >= id(gl_ft_start_mn)) {
          if (id(homeassistant_time).now().hour >= id(gl_ft_start_hr)) {
             return true;
          } else {
             return false;
          }
        } else {
           return false;
        }  
      } else {
         return false;
      }
  
  - platform: template
    name: "Stop Time Valid"
    id: stop_time_valid
    lambda: |-
      if (id(homeassistant_time).now().hour > id(gl_ft_stop_hr)) {
         return false;
      } else if (id(homeassistant_time).now().hour == id(gl_ft_stop_hr) && id(homeassistant_time).now().minute > id(gl_ft_stop_mn)) {
         return false;
      } else if (id(homeassistant_time).now().hour == id(gl_ft_stop_hr) && id(homeassistant_time).now().minute == id(gl_ft_stop_mn) && id(homeassistant_time).now().second > id(gl_ft_stop_ss)) {
         return false;
      } else {
         return true;
      }
    
  - platform: template
    name: "Run Time Valid"
    id: run_time_valid
    lambda: |-
      if (id(start_time_valid).state && id(stop_time_valid).state) {
         return true;
      } else {
         return false;
      }

switch:
  - platform: gpio
    pin: GPIO12
    id: relay
    restore_mode: ALWAYS_OFF
    
  - platform: template
    name: "Sonoff Plug 01"
    icon: mdi:television
    lambda: |-
      if (id(relay).state) {
        return true;
      } else {
        return false;
      }
    turn_on_action:
      - script.stop: relayison
      - script.execute: relayisoff
    turn_off_action:
      - script.stop: relayisoff
      - script.execute: relayison  

  - platform: restart
    name: "Sonoff Plug 01 Restart"

time:
  - platform: homeassistant
    id: homeassistant_time

interval:
  - interval: 1sec
    then:
      - script.execute: checkingstatuson
      - script.execute: checkingstatusoff
      - lambda: |-
          id(gl_ft_start_hr) = id(id_ft_start_hr).state;
          id(gl_ft_start_mn) = id(id_ft_start_mn).state;
          id(gl_ft_start_ss) = id(id_ft_start_ss).state;
          id(gl_ft_stop_hr) = id(id_ft_stop_hr).state;
          id(gl_ft_stop_mn) = id(id_ft_stop_mn).state;
          id(gl_ft_stop_ss) = id(id_ft_stop_ss).state;

script:
  - id: relayisoff
    then:
     - if:
        condition:
         binary_sensor.is_off: run_time_valid
        then:
        - switch.turn_on: relay
        - delay: 300s
        - switch.turn_off: relay
        
        else: 
        - switch.turn_on: relay
        
  - id: relayison
    then:
     - if:
        condition:
         binary_sensor.is_off: run_time_valid
        then:
        - switch.turn_off: relay        
        else: 
        - switch.turn_off: relay
        - delay: 5s        
        - switch.turn_on: relay
        
  - id: checkingstatuson
    then:
     - if:
        condition:
          and:
           - switch.is_off: relay
           - binary_sensor.is_on: run_time_valid
           - lambda: 'return id(trackingon) == false;'
        then:
          - script.stop: relayisoff
          - script.stop: relayison
          - switch.turn_on: relay
          - globals.set:
             id: trackingon
             value: 'true'
          - globals.set:
             id: trackingoff
             value: 'false'
             
  - id: checkingstatusoff
    then:
     - if:
        condition:
          and:
           - switch.is_on: relay
           - binary_sensor.is_off: run_time_valid
           - lambda: 'return id(trackingoff) == false;'
        then:
          - script.stop: relayisoff
          - script.stop: relayison          
          - switch.turn_off: relay
          - globals.set:
             id: trackingoff
             value: 'true'
          - globals.set:
             id: trackingon
             value: 'false'