// TheHungineer
// Arduino 7ch transceiver code


#include <SPI.h>
#include <nRF24L01.h>
#include <RF24.h>

const uint64_t my_radio_pipe = 0xE8E8F0F0E1LL; //This code should be the same for the receiver

RF24 radio(7, 8);  //Set CE and CSN pins

// The sizeof this struct should not exceed 32 bytes
struct Data_to_be_sent {
  byte ch1;
  byte ch2;
  byte ch3;
  byte ch4;
  byte ch5;
  byte ch6;
  byte ch7;
};

//Create a variable with the structure above and name it sent_data
Data_to_be_sent sent_data;



void setup()
{
  radio.begin();
  radio.setAutoAck(false);
  radio.setDataRate(RF24_250KBPS);
  radio.openWritingPipe(my_radio_pipe);
  Serial.begin(115200);

  //Reset each channel value
  sent_data.ch1 = 127;
  sent_data.ch2 = 127;
  sent_data.ch3 = 127;
  sent_data.ch4 = 127;
  sent_data.ch5 = 0;
  sent_data.ch6 = 0;
  sent_data.ch7 = 0;
}

/**************************************************/


void loop()
{

  sent_data.ch1 = map( analogRead(A0), 0, 1024, 0, 255);
  sent_data.ch2 = map( analogRead(A1), 0, 1024, 0, 255);
  sent_data.ch3 = map( analogRead(A2), 0, 1024, 0, 255);
  sent_data.ch4 = map( analogRead(A3), 0, 1024, 0, 255);
  sent_data.ch5 = map( analogRead(A4), 0, 1024, 0, 255);
  sent_data.ch6 = digitalRead(2);
  sent_data.ch7 = digitalRead(3);

  
  Serial.print(sent_data.ch1);
  Serial.print("   ");
  Serial.print(sent_data.ch2);
  Serial.print("   ");
  Serial.print(sent_data.ch3);
  Serial.print("   ");
  Serial.print(sent_data.ch4); 
  Serial.print("   ");                                                                                                                                                                                                                                                                                                                               
  Serial.print(sent_data.ch5);
  Serial.print("   ");
  Serial.print(sent_data.ch6);
  Serial.print("   ");
  Serial.print(sent_data.ch7);
  Serial.println();

  radio.write(&sent_data, sizeof(Data_to_be_sent));
}