<b>PIN HEADER</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 7.5 mm
>NAME
>VALUE
<b>PIN HEADER</b>
<b>RESISTOR</b><p>
type 0204, grid 7.5 mm
<b>Jumpers</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>JUMPER</b>
>NAME
>VALUE
<b>JUMPER</b>
1
2
3
>NAME
4
>VALUE
JUMPER
JUMPER
<b>TTL Devices, 74xx Series with European Symbols</b><p>
Based on the following sources:
<ul>
<li>Texas Instruments <i>TTL Data Book</i> Volume 1, 1996.
<li>TTL Data Book, Volume 2 , 1993
<li>National Seminconductor Databook 1990, ALS/LS Logic
<li>ttl 74er digital data dictionary, ECA Electronic + Acustic GmbH, ISBN 3-88109-032-0
<li>http://icmaster.com/ViewCompare.asp
</ul>
<author>Created by librarian@cadsoft.de</author>
<b>Dual In Line Package</b>
>NAME
>VALUE
Dual In Line Package
<B>PHOTO TRANSISTOR</B>
>NAME
>VALUE
<b>EAGLE Design Rules</b>
<p>
Die Standard-Design-Rules sind so gewählt, dass sie für
die meisten Anwendungen passen. Sollte ihre Platine
besondere Anforderungen haben, treffen Sie die erforderlichen
Einstellungen hier und speichern die Design Rules unter
einem neuen Namen ab.
<b>EAGLE Design Rules</b>
<p>
J. McClurg / W. Bauson design rules - for use with boards milled on the LPKF machine. Has bigger pads, traces, and spaces for ease of soldering. You also need to include the following in the BRD: section of the eagle.scr file: Set Drill 0.7mm; #Make vias 0.0276"
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.