<b>Microchip PIC Microcontrollers and other Devices</b><p>
Based on the following sources :
<ul>
<li>Microchip Data Book, 1993
<li>THE EMERGING WORLD STANDARD, 1995/1996
<li>Microchip, Technical Library CD-ROM, June 1998
<li>www.microchip.com
</ul>
<author>Created by librarian@cadsoft.de</author><B>Small Outline Wide Plastic Gull Wing</B><p>
300-mil body, package type SO>NAME>VALUE<B>Dual In Line</B><p>
package type P>NAME>VALUESmall Outline Wide Plastic Gull Wing
300-mil body, package type SODual In Line
package type P>NAME>VALUE<b>FLASH-Based 8-Bit CMOS Microcontroller</b><p>
Source: http://ww1.microchip.com/downloads/en/DeviceDoc/40300C.pdf<h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Molex 2-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST-Right Angle Male Header SMT</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
<li>JST_2MM_MALE</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.15"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST-Vertical Male Header SMT </h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value<h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 5mm/197mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Locking Footprint</h3>
Holes are staggered by 0.005" from center to hold pins while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3>
Holes are offset from center by 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Long Pads with Locking Footprint</h3>
Pins are staggered by 0.005" from center to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3>
Holes are offset from center 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Long Pads without Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST 2 Pin Right Angle Plated Through Hole</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>Plated Through Hole - 0.1" holes</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.2"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Pogo Pins Connector - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> No silk outline of connector.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
<br> This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>Spring Terminal- PCB Mount 2 Pin PTH</h3>
tDocu marks the spring arms
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p><h3>2 Pin Screw Terminal - 2.54mm</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE2 pin poke-home connector
part number 2062-2P from STA>NAME>VALUE>NAME>VALUE<h3>Plated Through Hole - 2x4</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04x2</li>
</ul></p>>NAME>VALUEPlated Through Hole
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Molex 2-Pin Plated Through-Hole
Specifications:
Pin count:2
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
JST-Right Angle Male Header SMT
Specifications:
Pin count: 2
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
JST_2MM_MALE
Plated Through Hole
Specifications:
Pin count:2
Pin pitch:0.15"
Example device(s):
CONN_02
JST-Vertical Male Header SMT
Specifications:
Pin count: 2
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Screw Terminal 5mm Pitch -2 Pin PTH
Specifications:
Pin count: 2
Pin pitch: 5mm/197mil
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Locking Footprint
Holes are staggered by 0.005" from center to hold pins while soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Molex 2-Pin Plated Through-Hole Locking Footprint
Holes are offset from center by 0.005" to hold pins in place during soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Long Pads with Locking Footprint
Pins are staggered by 0.005" from center to hold pins in place while soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking
Holes are offset from center 0.005" to hold pins in place during soldering.
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Long Pads without Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Plated Through Hole - No Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - 0.1" holes
Specifications:
Pin count:2
Pin pitch:0.2"
Example device(s):
CONN_02
Pogo Pins Connector - No Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole- No Silk
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
No silk outline of connector.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole - KIT
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Spring Terminal- PCB Mount 2 Pin PTH
tDocu marks the spring arms
Specifications:
Pin count: 4
Pin pitch: 0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
2 Pin Screw Terminal - 2.54mm
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
2 pin poke-home connector
part number 2062-2P from STAPlated Through Hole - 2x4
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_04x2
<h3>2 Pin Connection</h3>>VALUE>NAME<h3>8 Pin Connection</h3>
4x2 pin layout>VALUE>NAME<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>
2.54_SCREWTERM for use with PRT-10571.<br><br>
3.5mm Screw Terminal footprints for PRT-08084<br><br>
5mm Screw Terminal footprints for use with PRT-08432<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul><h3>SparkFun Discrete Semiconductors</h3>
This library contains diodes, optoisolators, TRIACs, MOSFETs, transistors, etc.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>Name>ValueSOD-323 (Small Outline Diode)>NAME>VALUE>Name>Value>Name>Value>Name>ValueSOD-323 (Small Outline Diode)Conventional Si diode>NAME>VALUE<h3>Diode</h3>
<p>These are standard reverse protection diodes and small signal diodes.</p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/11177”>SparkFun SparkPunk Sound Kit</a></li>
<li><a href=”https://www.sparkfun.com/products/13231”>SparkFun ESP8266 Thing</a></li>
</ul></p><b>Linear Devices</b><p>
Operational amplifiers, comparators, voltage regulators, ADCs, DACs, etc.<p>
<author>Created by librarian@cadsoft.de</author><b>TO-92</b>>NAME>VALUE<b>TO-220</b>>NAME>VALUE<b>Metal Can Package</b>>NAME>VALUE<b>SMALL OUTLINE TRANSISTOR</b><p>
TS-003>NAME>VALUE<b>TO 200 vertical</b>>NAME>VALUE123TO-92TO-220Metal Can PackageSMALL OUTLINE TRANSISTOR
TS-003TO 200 vertical>NAME>VALUEGNDPositive <b>VOLTAGE REGULATOR</b><p>
Source:<br>
http://cache.national.com/ds/LM/LM78L05.pdf<br>
http://www.fairchildsemi.com/ds/LM/LM7805.pdf<b>Small Signal Transistors</b><p>
Packages from :<br>
www.infineon.com; <br>
www.semiconductors.com;<br>
www.irf.com<p>
<author>Created by librarian@cadsoft.de</author><b>TO-18</b><p>
grid 2.54 mm>NAME>VALUETO-18
grid 2.54 mm>NAME>VALUE<b>NPN TRANSISTOR</b><b>Potentiometers</b><p>
Beckman, Copal, Piher, Spectrol, Schukat<p>
<author>Created by librarian@cadsoft.de</author><b>POTENTIOMETER</b><p>
Beckman Helitrim 25>NAME>VALUE31<b>POTENTIOMETER</b><p>
Beckman Helitrim 25>NAME>VALUE31<b>POTENTIOMETER</b><p>
Beckman Helitrim 25>NAME>VALUE31 3 <b>POTENTIOMETER</b><p>
Beckman Helitrim 25>NAME>VALUE31 3 <b>POTENTIOMETER</b><p>
Beckman Helitrim 64>NAME>VALUE313<b>POTENTIOMETER</b><p>
Beckman Helitrim 64>NAME>VALUE13<b>POTENTIOMETER</b>>NAME>VALUE132 3 1 <b>POTENTIOMETER</b><p>
distributor Schukat>NAME>VALUE<b>POTENTIOMETER</b><p>
distributor Schukat>NAME>VALUE<b>POTENTIOMETER</b><p>
distributor Schukat>NAME>VALUE<b>POTENTIOMETER</b><p>
distributor Schukat>NAME>VALUE<b>POTENTIOMETER</b><p>
distributor Schukat>NAME>VALUE<b>POTENTIOMETER</b><p>
distributor Schukat>NAME>VALUE<b>POTENTIOMETER</b><p>
Copal>NAME>VALUE31<b>POTENTIOMETER</b>>NAME>VALUE<b>POTENTIOMETER</b>>NAME>VALUE<b>POTENTIOMETER</b><p>
Piher>NAME>VALUE<b>POTENTIOMETER</b><p>
Piher>NAME>VALUE<b>POTENTIOMETER</b><p>
Copal31>NAME>VALUE<b>POTENTIOMETER</b><p>
Copal>NAME>VALUE313<b>POTENTIOMETER</b><p>
Copal>NAME>VALUE133<b>POTENTIOMETER</b><p>
Copal>NAME>VALUE13<b>POTENTIOMETER</b><p>
Spectrol>NAME>VALUE63P13 3 <b>POTENTIOMETER</b><p>
Spectrol>NAME>VALUE313<b>POTENTIOMETER</b><p>
Spectrol>NAME>VALUE313<b>POTENTIOMETER</b><p>
Spectrol>NAME>VALUE313<b>POTENTIOMETER</b><p>
Spectrol>NAME>VALUE313<b>POTENTIOMETER</b>31>NAME>VALUE<b>POTENTIOMETER</b>>NAME>VALUE31<b>POTENTIOMETER</b><p>
Piher>NAME>VALUE<b>POTENTIOMETER</b><p>
Piher>NAME>VALUE<b>POTENTIOMETER</b>>NAME>VALUE132 1 3 <b>POTENTIOMETER</b>>NAME>VALUE<b>POTENTIOMETER</b>>NAME>VALUE<b>POTENTIOMETER</b>>NAME>VALUE<b>Carbon Rotary Potentiometers - 20 mm size</b><p>
Source: Radiohm .. RAD.pdf>NAME>VALUE<b>Carbon Rotary Potentiometers - 20 mm size</b><p>
Source: Radiohm .. RAD.pdf>NAME>VALUE<b>COPAL ELECTRONICS SM-42/43 SURFACE MOUNT TRIMMERS</b> Side adjustmet<p>
Source: smt-pots.pdf>NAME>VALUE<b>COPAL ELECTRONICS SM-42/43 SURFACE MOUNT TRIMMERS</b> Side adjustmet<p>
Source: smt-pots.pdf>NAME>VALUE<b>COPAL ELECTRONICS SM-42/43 SURFACE MOUNT TRIMMERS</b> Top adjustmet<p>
Source: smt-pots.pdf>NAME>VALUE<b>COPAL ELECTRONICS SM-42/43 SURFACE MOUNT TRIMMERS</b> Top adjustmet<p>
Source: smt-pots.pdf>NAME>VALUE<b>3 mm SMD Trimming Potentiometer</b> Side Adjust<p>
Source: http://www.bourns.com/data/global/PDFs/3223.PDF>NAME>VALUE<b>3 mm SMD Trimming Potentiometer</b> Side Adjust<p>
Source: http://www.bourns.com/data/global/PDFs/3223.PDF>NAME>VALUE<b>3 mm SMD Trimming Potentiometer</b> Top Adjust<p>
Source: http://www.bourns.com/data/global/PDFs/3223.PDF>NAME>VALUEPOTENTIOMETER
Beckman Helitrim 25POTENTIOMETER
Beckman Helitrim 25POTENTIOMETER
Beckman Helitrim 25POTENTIOMETER
Beckman Helitrim 25POTENTIOMETER
Beckman Helitrim 64POTENTIOMETER
Beckman Helitrim 64POTENTIOMETERPOTENTIOMETER
distributor SchukatPOTENTIOMETER
distributor SchukatPOTENTIOMETER
distributor SchukatPOTENTIOMETER
distributor SchukatPOTENTIOMETER
distributor SchukatPOTENTIOMETER
distributor SchukatPOTENTIOMETER
CopalPOTENTIOMETERPOTENTIOMETERPOTENTIOMETER
PiherPOTENTIOMETER
PiherPOTENTIOMETER
CopalPOTENTIOMETER
CopalPOTENTIOMETER
CopalPOTENTIOMETER
CopalPOTENTIOMETER
SpectrolPOTENTIOMETER
SpectrolPOTENTIOMETER
SpectrolPOTENTIOMETER
SpectrolPOTENTIOMETER
SpectrolPOTENTIOMETERPOTENTIOMETERPOTENTIOMETER
PiherPOTENTIOMETER
PiherPOTENTIOMETERPOTENTIOMETERPOTENTIOMETERPOTENTIOMETERCarbon Rotary Potentiometers - 20 mm size
Source: Radiohm .. RAD.pdfCarbon Rotary Potentiometers - 20 mm size
Source: Radiohm .. RAD.pdfCOPAL ELECTRONICS SM-42/43 SURFACE MOUNT TRIMMERS Side adjustmet
Source: smt-pots.pdfCOPAL ELECTRONICS SM-42/43 SURFACE MOUNT TRIMMERS Side adjustmet
Source: smt-pots.pdfCOPAL ELECTRONICS SM-42/43 SURFACE MOUNT TRIMMERS Top adjustmet
Source: smt-pots.pdfCOPAL ELECTRONICS SM-42/43 SURFACE MOUNT TRIMMERS Top adjustmet
Source: smt-pots.pdf3 mm SMD Trimming Potentiometer Side Adjust
Source: http://www.bourns.com/data/global/PDFs/3223.PDF3 mm SMD Trimming Potentiometer Side Adjust
Source: http://www.bourns.com/data/global/PDFs/3223.PDF3 mm SMD Trimming Potentiometer Top Adjust
Source: http://www.bourns.com/data/global/PDFs/3223.PDF>NAME>VALUE<b>POTENTIOMETER</b><b>Jumpers</b><p>
<author>Created by librarian@cadsoft.de</author><b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUEJUMPERJUMPERJUMPERJUMPERJUMPERJUMPERJUMPERJUMPERJUMPER>NAME>VALUE>NAME>VALUE<b>JUMPER</b>Bridge<h3>SparkFun Clocks, Oscillators and Resonators</h3>
This library contains the real-time clocks, oscillators, resonators, and crystals we use.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>5x3.2mm SMD Crystal</h3>
<p>Example: <a href="https://www.sparkfun.com/products/94">16MHz SMD Crystal</a> (<a href="https://www.sparkfun.com/datasheets/Components/SPK-5032-16MHZ.pdf">Datasheet</a>)</p>>NAME>VALUE<h3>HC49/US 11.6x4.6mm PTH Crystal</h3>
<p><a href="https://www.digikey.com/Web%20Export/Supplier%20Content/Citizen_300/PDF/Citizen_HC49US.pdf?redirected=1">Example Datasheet</a></p>>NAME>VALUE5x3.2mm SMD Crystal
Example: 16MHz SMD Crystal (Datasheet)HC49/US 11.6x4.6mm PTH Crystal
Example Datasheet<h3>Crystal (no ground pin)</h3>>NAME>VALUE12<h3>16MHz Crystal</h3>
<p><a href="http://www.digikey.com/product-search/en?keywords=535-9122-1-ND">Digikey Example</a></p>
<p><ul><li>Frequency: 16MHz</li>
<li>Frequency Stability: ±50ppm</li>
<li>Frequency Tolerance: ±20ppm</li>
<li>Load Capacitance: 18pF</li></ul></p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/12640”>Pro Micro -5V/16MHz</a></li>
<li><a href=”https://www.sparkfun.com/products/10097”>SparkFun Serial Enabled LCD Kit</a></li>
</ul></p><h3>SparkFun Capacitors</h3>
This library contains capacitors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE2 PTH spaced 0.1" apart>Name>ValueGeneric EIA 3216 (1206) polarized tantalum capacitor>NAME>VALUE<p><b>Polarized 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEGeneric EIA 3528 polarized tantalum capacitor>NAME>VALUE2.5 mm spaced PTHs with 5 mm diameter outline and standard solder mask>Name>Value2.5 mm spaced PTHs with top copper masked>Name>ValueMetric Size Code EIA 6032-25 Median (Nominal) Land Protrusion<br />
http://www.kemet.com/Lists/ProductCatalog/Attachments/254/KEM_T2005_T491.pdf>Name>Value<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<h3>CAP-PTH-SMALL-KIT</h3>
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.2 PTH spaced 0.1" apartGeneric EIA 3216 (1206) polarized tantalum capacitorPolarized 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic EIA 3528 polarized tantalum capacitor2.5 mm spaced PTHs with 5 mm diameter outline and standard solder mask2.5 mm spaced PTHs with top copper maskedMetric Size Code EIA 6032-25 Median (Nominal) Land Protrusion
http://www.kemet.com/Lists/ProductCatalog/Attachments/254/KEM_T2005_T491.pdfGeneric 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.CAP-PTH-SMALL-KIT
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.>NAME>VALUE>NAME>VALUE<h3>22pF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>10.0µF polarized capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>0.1µF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>SparkFun Resistors</h3>
This library contains resistors. Reference designator:R.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>AXIAL-0.3</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>>Name>Value<h3>AXIAL-0.1</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.</p>>Name>Value<h3>AXIAL-0.1-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>Name>Value<h3>AXIAL-0.3-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEAXIAL-0.3
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.AXIAL-0.1
Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.AXIAL-0.1-KIT
Commonly used for 1/4W through-hole resistors. 0.1" pitch between holes.
Warning: This is the KIT version of the AXIAL-0.1 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.AXIAL-0.3-KIT
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.
Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.>NAME>VALUE<h3>10kΩ resistor</h3>
<p>A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia</p><h3>SparkFun Displays</h3>
This library contains LCDs, OLEDs, etc.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>LCD-16x2</h3>
<p>For Standard hitatchi type LCDs with backlight. Has 16 pin connection, silk outiline, and mounting holes.</p>
<p>Specifications:
<ul><li>Pin count: 16</li>
<li>Pin pitch: 0.1"</li>
<li>Area: </li>
</ul></p>
<p><b>Datasheet referenced for footprint:</b></p>
<p>Example device(s):
<ul><li><a href="https://www.sparkfun.com/products/255">Basic 16x2 LCD</a></li>
</ul></p>1>Name>Value<h3>LCD-16x2</h3>
<p>For Standard hitatchi type LCDs with backlight. Has 16 pin connection and outline on docu, and mounting holes, but no silkscreen.</p>
<p>Specifications:
<ul><li>Pin count: 16</li>
<li>Pin pitch: 0.1"</li>
<li>Area: </li>
</ul></p>
<p><b>Datasheet referenced for footprint:</b></p>
<p>Example device(s):
<ul><li><a href="https://www.sparkfun.com/products/255">Basic 16x2 LCD</a></li>
</ul></p>1>Name>Value<h3>LCD-16x2 No silk or mounting holes</h3>
<p>For Standard hitatchi type LCDs with backlight. Has 16 pin connection and outline on docu, but no silk or mounting holes.</p>
<p>Specifications:
<ul><li>Pin count: 16</li>
<li>Pin pitch: 0.1"</li>
<li>Area: </li>
</ul></p>
<p><b>Datasheet referenced for footprint:</b></p>
<p>Example device(s):
<ul><li><a href="https://www.sparkfun.com/products/255">Basic 16x2 LCD</a></li>
</ul></p>1>Name>Value<h3>8x2 Character LCD w/ Backlight</h3>
<p>Specifications:
<ul><li>Pin count: 16</li>
<li>Pin pitch: 0.1"</li>
<li>Outer Dimensions: 40.0 x 35.4mm</li>
<li>Viewing Area: 26.4 x 13.9mm<br></li>
<li>Character Size: 2.95 x 4.75mm<br></li>
</ul></p>
<p><b>Datasheet referenced for footprint:</b></p>
<p>Example device(s):
<ul><li><a href="http://amotec-display.com/pdf/ADM0802A.pdf">Amotec Display part ADM0802A PDF</a></li>
</ul></p>>Name>Value<h3>LCD-8x2 for Kits</h3>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</ul></p>
<p>Specifications:
<ul><li>Pin count: 16</li>
<li>Pin pitch: 0.1"</li>
<li>Outer Dimensions: 40.0 x 35.4mm</li>
<li>Viewing Area: 26.4 x 13.9mm<br></li>
<li>Character Size: 2.95 x 4.75mm<br></li>
</ul></p>
<p><b>Datasheet referenced for footprint:</b></p>
<p>Example device(s):
<ul><li><a href="http://amotec-display.com/pdf/ADM0802A.pdf">Amotec Display part ADM0802A PDF</a></li>
</ul></p>>Name>ValueLCD-16x2
For Standard hitatchi type LCDs with backlight. Has 16 pin connection, silk outiline, and mounting holes.
Specifications:
Pin count: 16
Pin pitch: 0.1"
Area:
Datasheet referenced for footprint:
Example device(s):
Basic 16x2 LCD
LCD-16x2
For Standard hitatchi type LCDs with backlight. Has 16 pin connection and outline on docu, and mounting holes, but no silkscreen.
Specifications:
Pin count: 16
Pin pitch: 0.1"
Area:
Datasheet referenced for footprint:
Example device(s):
Basic 16x2 LCD
LCD-16x2 No silk or mounting holes
For Standard hitatchi type LCDs with backlight. Has 16 pin connection and outline on docu, but no silk or mounting holes.
Specifications:
Pin count: 16
Pin pitch: 0.1"
Area:
Datasheet referenced for footprint:
Example device(s):
Basic 16x2 LCD
8x2 Character LCD w/ Backlight
Specifications:
Pin count: 16
Pin pitch: 0.1"
Outer Dimensions: 40.0 x 35.4mm
Viewing Area: 26.4 x 13.9mm
Character Size: 2.95 x 4.75mm
Datasheet referenced for footprint:
Example device(s):
Amotec Display part ADM0802A PDF
LCD-8x2 for Kits
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Specifications:
Pin count: 16
Pin pitch: 0.1"
Outer Dimensions: 40.0 x 35.4mm
Viewing Area: 26.4 x 13.9mm
Character Size: 2.95 x 4.75mm
Datasheet referenced for footprint:
Example device(s):
Amotec Display part ADM0802A PDF
<h3>Standard Character Display Symbol with Standard Backlight</h3>>Name>Value16x2 LCD<h3>Standard text-only 16x2 parallel input LCD</h3>
<p>Basic 16 character by 2 line display. Typically utilizes the extremely common HD44780 parallel interface chipset </p>
<p>SparkFun Products:
<ul>
<li><a href="https://www.sparkfun.com/products/255">Basic 16x2 Green</a></li>
<li><a href="https://www.sparkfun.com/products/11122">Basic 8x2 Green</a></li>
</ul></p><b>Jumpers</b><p>
<author>Created by librarian@cadsoft.de</author><b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUE<b>JUMPER</b>>NAME>VALUEJUMPERJUMPERJUMPERJUMPERJUMPERJUMPERJUMPERJUMPER>NAME>VALUEBridge<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.10 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.12 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.10 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.12 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
type 0204, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0204, grid 7.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 10 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 12 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 15mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 2.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 7.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0309, grid 10mm>NAME>VALUE<b>RESISTOR</b><p>
type 0309, grid 12.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0411, grid 12.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0411, grid 15 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0411, grid 3.81 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0414, grid 15 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0414, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0617, grid 17.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0617, grid 22.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0617, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0922, grid 22.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0613, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0613, grid 15 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0817, grid 22.5 mm>NAME>VALUE0817<b>RESISTOR</b><p>
type 0817, grid 6.35 mm>NAME>VALUE0817<b>RESISTOR</b><p>
type V234, grid 12.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type V235, grid 17.78 mm>NAME>VALUE<b>RESISTOR</b><p>
type V526-0, grid 2.5 mm>NAME>VALUE<b>Mini MELF 0102 Axial</b>>NAME>VALUE<b>RESISTOR</b><p>
type 0922, grid 7.5 mm>NAME>VALUE0922<b>CECC Size RC2211</b> Reflow Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC2211</b> Wave Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC3715</b> Reflow Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC3715</b> Wave Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC6123</b> Reflow Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC6123</b> Wave Soldering<p>
source Beyschlag>NAME>VALUE<b>RESISTOR</b><p>
type RDH, grid 15 mm>NAME>VALUERDH<b>RESISTOR</b><p>
type 0204, grid 2.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0309, grid 2.5 mm>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip, wave soldering<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip, wave soldering<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip, wave soldering<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip, wave soldering<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip, wave soldering<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip, wave soldering<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip, wave soldering<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip, wave soldering<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip, wave soldering<b>RESISTOR</b><p>
chip<b>RESISTOR</b><p>
chip, wave soldering<b>RESISTOR</b><p>
MELF 0.10 W<b>RESISTOR</b><p>
MELF 0.25 W<b>RESISTOR</b><p>
MELF 0.12 W<b>RESISTOR</b><p>
MELF 0.10 W<b>RESISTOR</b><p>
MELF 0.25 W<b>RESISTOR</b><p>
MELF 0.25 W<b>RESISTOR</b><p>
MELF 0.12 W<b>RESISTOR</b><p>
MELF 0.25 W<b>RESISTOR</b><p>
type 0204, grid 5 mm<b>RESISTOR</b><p>
type 0204, grid 7.5 mm<b>RESISTOR</b><p>
type 0207, grid 10 mm<b>RESISTOR</b><p>
type 0207, grid 12 mm<b>RESISTOR</b><p>
type 0207, grid 15mm<b>RESISTOR</b><p>
type 0207, grid 2.5 mm<b>RESISTOR</b><p>
type 0207, grid 5 mm<b>RESISTOR</b><p>
type 0207, grid 7.5 mm<b>RESISTOR</b><p>
type 0309, grid 10mm<b>RESISTOR</b><p>
type 0309, grid 12.5 mm<b>RESISTOR</b><p>
type 0411, grid 12.5 mm<b>RESISTOR</b><p>
type 0411, grid 15 mm<b>RESISTOR</b><p>
type 0411, grid 3.81 mm<b>RESISTOR</b><p>
type 0414, grid 15 mm<b>RESISTOR</b><p>
type 0414, grid 5 mm<b>RESISTOR</b><p>
type 0617, grid 17.5 mm<b>RESISTOR</b><p>
type 0617, grid 22.5 mm<b>RESISTOR</b><p>
type 0617, grid 5 mm<b>RESISTOR</b><p>
type 0922, grid 22.5 mm<b>RESISTOR</b><p>
type 0613, grid 5 mm<b>RESISTOR</b><p>
type 0613, grid 15 mm<b>RESISTOR</b><p>
type 0817, grid 22.5 mm<b>RESISTOR</b><p>
type 0817, grid 6.35 mm<b>RESISTOR</b><p>
type V234, grid 12.5 mm<b>RESISTOR</b><p>
type V235, grid 17.78 mm<b>RESISTOR</b><p>
type V526-0, grid 2.5 mm<b>Mini MELF 0102 Axial</b><b>RESISTOR</b><p>
type 0922, grid 7.5 mm<b>CECC Size RC2211</b> Reflow Soldering<p>
source Beyschlag<b>CECC Size RC2211</b> Wave Soldering<p>
source Beyschlag<b>CECC Size RC3715</b> Reflow Soldering<p>
source Beyschlag<b>CECC Size RC3715</b> Wave Soldering<p>
source Beyschlag<b>CECC Size RC6123</b> Reflow Soldering<p>
source Beyschlag<b>CECC Size RC6123</b> Wave Soldering<p>
source Beyschlag<b>RESISTOR</b><p>
type RDH, grid 15 mm<b>RESISTOR</b><p>
type 0204, grid 2.5 mm<b>RESISTOR</b><p>
type 0309, grid 2.5 mm>NAME>VALUE<B>RESISTOR</B>, American symbol
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.